Due to the rate at which people brick their device nowadays I will
quickly show u guys how to un-brick a bricked device in case u don't
know the meaning of brick... A brick device is a device which has become
non functional or obsolete.I will show u guys three ways to recover any bricked phone
Method 1
This is the basic method. It was provided by the phone producers.Its easy and simple. Just boot the android into recovery mode, wipe/clean the cache and factory reset. If this method didn't work. Follow the next method below.
Method 2
- Just look for the same device as the one that was bricked
- Switch off the phone. Hold the power key+volume up key to boot into recovery mood.
- Navigate to Backup and restore with the down volume key.
- Select Backup.
- After successfully backing up the good device , remove the SD card, put it in your damaged phone search for the back up path/folder
- Boot the bricked device into recovery mode
- Go to backup/restore select restore
- Navigate to the backup folder click and confirm
- Your device phone should now boot normally as purchased.
Method 3
Your
device should be well rooted and your USB debugging should be on(did
your on your USB debugging before bricking your device) if u didn't root
your phone just save yourself the stress of reading further.
- Search(Google) and Download PdaNet
- Search and Download MTK Droid tools
- Search for the the boot.img of your device look for the same phone model and collect the boot image via MTK tools backup or download boot.img file for your device.
- Put on your lifeless device and plug it to your pc..
- Install PdaNet to your PC
- Launch and install MTK droid tools.. Extract the files, make sure u know the path u extracted the files to!
- Open the MTK android tools path/ and launch the green logo
- You will see should your device's tails and the box bottom should be yellow
- Press root at the bottom, and click OK till u stop seeing OK
- If the box becomes green, just click on the root, backup, recovery button
- press to choose boot.img file
- Click Recovery and Boot then scroll to the boot.img and select
- Click yes continuously for every prompt
- Click to boot into run recovery after u see the recovery prompt
- You can now wipe your cache partition, factory settings and DAV link.
You can also use this method to flash in a new custom ROM.
I believe your problem should be solved now. But if the problem persist
or Ur stuck in any step... Just comment with your question.
0 comments:
Post a Comment